About Us
ILG COOLAIR is a leading supplier of industrial and commercial fans, ventilators, blowers and accessories for various air-moving applications.
ILG COOLAIR offers a complete line of fan equipment, from small panel fans capable of moving a few hundred cubic feet per minute, to large, heavy-duty industrial mechanical draft fans with capacities to 1,000,000 CFM and with static pressures from 0" Water Gauge (WG) to 150" WG.
ILG COOLAIR products include standard centrifugal fan and axial fan designs as well as custom manufactured fan units to meet our customers' requirements based on ILG COOLAIR manufacturing standard.
Over the years ILG COOLAIR supplied fans to a wide range of industries and applications including: combustion air supply, material handling, process ventilation, ovens and dryers, iron and steel industry, mine and tunnel ventilation, petro-chemical, power generation, marine and off-shore structures, pulp and paper, HVAC, paint/spray booths, fertilizer and various emission control applications. For the commercial HVAC market, ILG COOLAIR offers general ventilation fans for institutional and retail buildings, schools, restaurants and hospitals. Special materials, construction, explosion-proof and spark-resistant fan design, variety of coatings and accessories are available to meet practically any application needs.
ILG COOLAIR air moving products are best know for "industrial quality" assuring reliable performance, relentless dependability and longevity. A staff of specially trained engineers will design a dependable fan that exactly fits customers' dimensional and fan performance requirements.
ILG COOLAIR fans and blowers are sold and serviced by air moving experts that can evaluate your needs and provide best recommendations for your application.
Suppliers of
industrial regenerative side channel blowers, forward curved pressure
blowers and fans in stainless steel, alloy, cast aluminium, cast iron,
polypropylene and FRP construction. Canadian Blower, Chicago supplies
replacement forward curved blowers and wheels for forward curved
blowers and fans manufactured by Buffalo Blower - New York, Twin City
Fan, Northern Blower, Chicago Blower, Sheldons, Cincinnati Fan,
Hartzell, IAP, Industrial air products, Canadian blower, Aerovent, Penn
Ventilation, Penn-Barry, Barry Blower, ACME, Aerovent, Alphair,
American Fan, Lau Industries, Clarage, Delhi, Canarm, Leader Fan,
Daltec, ABB, Flakt, Flaktwoods, Woods, MK Plastics, Robinson
Industrial, Garden City Fan, Loren Cook, Jen-air, Jenn Fan, Aeroflo,
Grainger, Greenheck, Kice Fan, ILG Industries, Canada Fan, Industrial
Air, Ceilcote, Breidert, Anderson 2000, Solar and Palau, Strobic air,
Trane, TCF Axial.
BUFFALO BLOWER's
RADIAL INDUSTRIAL FAN
General Industrial radial fans
employ four distinct radial-wheel designs for use in moderate-pressure
applications.
Typical uses include dust
collection, pneumatic-conveying, moisture blow-off, incineration and
oven and dryer
exhaust.
Flat radial-blade design best
for material-conveying applications with airstreams containing coarse
material or heavy dust
and particulate matter. As
with the radial-curved wheel, the LS and RIM wheels provide stable
airflow performance over the
entire pressure range, from
wide-open to completely closed-off.
Unique, high-efficiency [up to
74% mechanical efficiency] radial wheel utilizes curved blades and a
tapered frontplate to
minimize turbulence and
control flow through the wheel. Can be used for airstreams with
moderate dust loads that
do not contain large particles
or wet, sticky materials. Performance is stable from wide-open to
completely closed-off.
High efficiency shrouded
wheels. AH is idealy suited for light to moderate dust loads. AM can
accommodate heavier loads.
Performance is stable from
wide-open to completely closed off. BP wheel – backplate wheel designed
for materialhandling
applications involving paper
or plastic scrap and trim, granular material, and low-density bulk
materials.
RD wheel – rugged-duty
backplated radial wheel for high-density bulk material
such as wood chips, corrugated
paper trim, and metal scrap or trim.
Constructed for static
pressures to 20” WG.
ABRASION-RESISTANT
CONSTRUCTION
The following modifications
are available to increase service life when fan is subjected to
abrasion or erosion from air-borne
contaminants.
ASTM A-514 blades – wheel
blades fabricated to alloy steel with 321 minimum Brinell hardness.
Checkerplate blades – wheel
blades fabricated of four-way floor plate.
Scroll liners – removable
liners of ASTM A-514 alloy are bolted to housing interior... split
housing required.
HEAT-FAN CONSTRUCTION.
Successful operation of fans
at elevated temperatures requires consideration of two main factors:
Effect of temperature on wheel
maximum safe speeds.
Effect of air density on
aerodynamic
performance.
Easily accessible motor
compartment
with adjustable motor
platform.
Rotatable housing to any of six
standard discharge positions
Heat fan modification include
shaft coolers and shaft-cooler guards on all arrangements and motor
heat shields for
Arrangements 9 and 10.
Aluminum shaft coolers are designed to move ambient air over the
inboard bearing and dissipate
heat transferred through the
shaft. Arrangements 1 and 8 fans can be modified for 800°F -
1000°F operation. In this
temperature range, stainless
steel wheel and shafting are required. 950X/960X alloy wheels are also
available to maintain
standard safe speed limits at
500°F -800°F temperatures when required.
HANDLING CORROSIVES
Industrial exhaust and process
applications are sometimes made more difficult due to the presence of
corrosive fumes or
particulate. Alternate alloy
construction or special paint systems can usually provide some degree
of longer life.
Radial Fans can be constructed
with airstream parts of aluminum, 304, or 316 stainless steel. 316
generally provides the best
corrosion resistance of the
three types available. However, the effectiveness of any particular
alloy can only be judged by the
user’s experience in his or
similar applications.
These units can be equipped
with following optional accessories like:
- Weather Cover
- Belt Guard
- Automatic Discharge Shutter
- Bolted and Quick-Opening
Clean-Out Doors
- Vibration Rail Bases
- Inlet Vanes
- Drain fittings
- Inlet or Discharge Screens
- Flanged Inlets or Outlets
- Heat Slingers
- Protective Coatings
- Spark Resistant
Construction
Please call or email us for an
appropriate selection of INDUSTRIAL
RADIAL FANS !
Sincerely,
Jonathan Lure
BUFFALO BLOWER
Phone: 1-716-393-9299
Fax: 1-866-BEST FAN
(237-8326)
buffaloblower.co@outlook.com
If you want to unsubscribe,
click here.
blower engineering
multistage blower
regenerative blower
side channel blower
rotary lobe blower
positive displacement blower
rietschle
plastec
aeroflo
continental fan
industrial air
Cincinnati fan